Chemical Grease High Load and Low Speed ​​- All Surfaces and Central Lubrication

    Description

    Chemical Lubricating Grease High Load and Low Speed ​​- All Surfaces and Central Lubrication (product 647) is a heavy duty NLGI 2 grease. It is used for lubricating more heavily loaded ball, rolling, roller and sliding bearings and slow-running parts to be lubricated. The product is ideally suited for environments where PTFE is not allowed to be used. 

    Use Chemical Lubricating Grease High Load and Low Speed ​​- All Surfaces and Central Lubrication for lubricating the suspension of cars and trucks, racks in greenhouse complexes, extension arms, submerged engines, gear transmissions in derailleurs, earth-moving and agricultural machines, bridges and locks . In addition, the product is used to lubricate water wells in the road surface, so that the cover can be easily removed.

    • For slow-running parts 
    • Resistant to high pressure and temperatures up to 130 °C
    • Extra protection against shock and vibration loads

    Reduce the lubrication frequency by a factor of 3 to 5.

    Download SDS Chemical Lubricant High Load and Low Speed ​​- All Surfaces and Central Lubrication

    Product form

    Chemical Lubricating Grease High Load and Low Speed ​​- All Surfaces and Central Lubrication (product 647) is a heavy duty... Read more

    Shipped within 2 business days

    €132,13

      • Free shipping from €200 Excl. VAT
      • Secure payment
      • Work safer and more environmentally friendly

      Graduated prices

      Discount Number Graduated price (Excl. VAT) per 400 ml/400 g and per kg
      		12 x 400 ml €16.20
      		12 x 400g €37.10
      2.70%      		 24 x 400 g €36.10
      7.55%      		 48 x 400 g €34.30
      1 x 10 kg €84.35
      1.19%      		 2 x 10 kg €83.35
      5.87%      		 3 x 10 kg €79.40
      10.55%      		 1 x 25 kg €75.45
      15.29% 1 x 50 kg €71.45
      23.77% 2 x 50 kg €64.30
      Instructions

      • New bearings: fill the bearings until the grease is just visible. Depending on use, after about a week, due to air formation in the bearing housing, lubricate until the pressure has built up.
      • Old bearings: If possible, lubricate until filled with new grease, then follow procedure for new bearings.
      • General: reduces the lubrication frequency by a factor of 3 to 5 compared to normal lubrication.

      Specifications
      Specifications
      Colour Beige to brown
      NLGI (ASTM D 217/DIN 51 818)      		 2
      thickener
      Calcium/Lithium
      Operating temperature
      -20 to 130 °C
      Penetration at 25°C (ASTM D 217/DIN 51 818)
      265 to 295mm/10
      4 bullet welding test (DIN 51 350)
      5000 N
      Anti-corrosion test SKF-EMCOR ( DIN 51 802/ IP220 )
      0-0
      Dropping point (IP 396/DIN ISO 2176)
      >190 °C
      Base oil viscosity at 40°C ( ISO 314 0 )
      945 cst
      Comments

      • Extra protection against the penetration of water, mud and dirt due to collar formation.
      • The product must be tested for miscibility with certain Li and Ca fats.
      • Extremely good adhesion.

      More information about our packaging

      400 grams = cartridges
      400 ml = aerosol cans
      10 kg = 1 bucket of 10 kg
      25 kg = 1 drum of 25 kg
      50 kg = 1 drum of 50 kg

      For more packaging options, please email our customer service customer.service@vossenlaboratories.com

      Description

      Chemical Lubricating Grease High Load and Low Speed ​​- All Surfaces and Central Lubrication (product 647) is a heavy duty NLGI 2 grease. It is used for lubricating more heavily loaded ball, rolling, roller and sliding bearings and slow-running parts to be lubricated. The product is ideally suited for environments where PTFE is not allowed to be used. 

      Use Chemical Lubricating Grease High Load and Low Speed ​​- All Surfaces and Central Lubrication for lubricating the suspension of cars and trucks, racks in greenhouse complexes, extension arms, submerged engines, gear transmissions in derailleurs, earth-moving and agricultural machines, bridges and locks . In addition, the product is used to lubricate water wells in the road surface, so that the cover can be easily removed.

      • For slow-running parts 
      • Resistant to high pressure and temperatures up to 130 °C
      • Extra protection against shock and vibration loads

      Reduce the lubrication frequency by a factor of 3 to 5.

      Download SDS Chemical Lubricant High Load and Low Speed ​​- All Surfaces and Central Lubrication

      Login

      Forgot your password?

      Don't have an account yet?
      Create account